The two Schneider Electric UPS Network Management Cards (NMC) mentioned below are ... The default user name is device, and the default password is apc.

Apc devices. Manufacturer of backup power sources http://www.apc.com · 9606 Smart Slot, 1 password. APC Max 2000, no passwords. Smart UPS, 1 password.

Find the default login, username, password, and ip address for your APC SMART UPS router. You will need to know then when you get a new router, or when ...

I have a couple of APC UPS units in our racks that have AP9617 Network ... Is there anyway to reset these passwords back to the defaults so that we can set ... other device through the serial port, to access the control console.

APC Default Usernames & Passwords The default credentials needed to login to your APC router · APC default Password List (Valid December 2020) · Instructions ...

UPS, Telnet, apc, apc, Admin. UPSes (Web/SNMP Mgmt Card), HTTP, device, device, Admin, Secondary access account (next to apc/apc). USV Network ...

APC: What is the default IP address and password? /FAQs. The default IP address is 192.168.2.66 with a subnet mask of 255.255.255.0. The default username ...

To login to APC UPS Router, launch your browser and goto IP Address , enter the default username apc and the default password apc to login.

default user name and password are both apc. • A Device User can access only the following: – In the Web interface, the menus on the UPS and Environment ...

The default username and password for apc pdu is "apc". ... Card setup, BOOTP and DHCP configuration, Local access to the control console among others.

At the prompt, enter the user password for your UPS (apc, by default), then select NMC Settings. 5. For the Network Management Card you are configuring, ...

NMC 2 communicates with the UPS through the cable connection between the ... At the prompt, enter the user password for your UPS (apc, be default), then.

The Administrator's default. User Name and Password are both apc. • A Device Manager can only access the Log option in the Events menu and use the UPS and ...

Enter the user name and password (by default, apc and apc for a Super User, or device and apc for a. Device User). Page 4. 2. UPS Network Management Card 2 ...

APC by Schneider Electric is not responsible for damage sustained during ... For the location of the UPS Intelligent Card Slot, see the UPS User Manual. 1. ... You can modify IP setting, online upgrade, password management, and static trap ...

How to set the APC UPS Network Management Card (AP9631) TCP/IP settings. ... until "User Name" appears... the default username/password is: apc/apc .

Management Access. Use the admin password for all management connections. To restore to factory default, use a bent paperclip to press the recessed reset ...

APC UPS Network Management Card 2 AP9630 User Manual • How to recover from a lost password • APC Hardware.

Technical Tip for Resetting password of a UPS Network Management Card ... password of the installed NMC (Part Number: 46M4110) can gain access to the ...

APC UPS Network Management Cards provide Remote monitoring and control of an ... Reboot equipment remotely, Password Security, Three-tier user access, ...

Caution: Damage to the UPS or Network Management Card can result if you do ... your browser by using apc (the default) for both the user name and password.

Backup APC SmartUPS Network Management Card Config ... 331 User name okay, need password. ... 150 File status okay; about to open data connection. ... this putting it on the FTP server (i.e. doing a file dump from the Smart UPS device)?.