How do I access my ONU router?
How to Enable the Router Mode
- Navigate to the ONU list. tab and select one or more of the connected ONUs.
- Select the CONFIGURE button to modify the ONU settings. Admin password: <secret> Mode: Router. VLAN > WAN VLAN: 1. Provision LAN: Checked. IPv4 WAN > Mode: DHCP client. ...
- Apply the changes by clicking on the SAVE button.
How do I log into ONU?
Optronix ONU Router Internet Configuration
- Open your browser and go to 192.168.1.1 IP link.
- Enter your username as useradmin and password as 1234.
- Go to Network from the menu option provided from the list.
- Click on delete button to remove all old configuration from Optronix router.
- Click on Add button.
How do I get on EPON ONU?
NetLink ONU Configuration at 192.168. 1.1 for FTTH Voice & Internet
- Login to Netlink ONU in any browser with url 192.168.1.1.
- Enter username and password. ...
- Go to Management > Device Management > Restore default > Restore Factory default.
- Click Network > Internet > Delete.
- Check Status > Wan Connection info >
How do I find my ONU IP address?
The IP address of the ONU can be obtained through DHCP, Static, or PPPoE. The IP address of the PC connected to the ONU can be obtained from the DHCP address pool of the ONU or can be set manually.
What is the password for WiFi repeater?
What is my repeater IP address?
You need to configure your computer's IP address in the same subnet with the REPEATER. By factory default, the IP address of the REPEATER is “192.168. 1.1”, so you should assign an IP address like “192.168. 1.
How do I make my Nokia router a repeater?
Using the Web GUI
- Connect to your Nokia WiFi network (or connect your laptop to your root Nokia WiFi Beacon with an Ethernet cable)
- Under the Network tab, select MESH on the left side of the web page.
- Select the check box Enable Bridge Mode to enable or disable bridge mode.
- Click the Reboot button in the pop-up window.