How do I access ubiquiti NanoBeam?
1.2) To get access to the NanoStation / NanoBeam / PowerBeam you need to assign a static IP-address to you PC / Notebook. The Ubiquiti components by default have the IP-address 192.168. 1.20 – please assign an IP-adress to your PC / Notebook from the same subnet, e.g. the IP-address 192.168. 1.10.
What is the default password for NanoBeam 5ac gen2?
How do I reset my ubiquiti NanoBeam air conditioner?
Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the NanoBeam is already powered on. Alternatively, the NanoBeam may be reset remotely via a Reset button located on the bottom of the Gigabit PoE Adapter.
How does Ubiquiti NanoBeam work?
The NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
What is a 192.168 1.2 IP address?
1.2 IP Address. 192.168. 1.2 is a private IP address and is often used as a router IP or default gateway on many routers. So, for example, if the router's settings need to be adjusted, this IP address can get you access to the administrative console and make the necessary changes.
How do I change my 192.168 LL username and password?
TP-Link:
- Login to Router admin panel using its default IP Address – 192.168.0.1 / 192.168.1.1.
- Enter the default username and password (admin/admin in most cases).
- Navigate to Wireless > Wireless Security > WPA/WPA2 – Personal (Recommended) > Password .
- Enter your preferred password and Save the change.
How do I connect to my 192.168 1.1 router?
How to Login 192.168. 1.1?
- Turn on your router and connect it to your computer with an Ethernet cable. ...
- Open your favorite web browser and type “http://192.168.1.1” into the address bar. ...
- Enter the correct router login/password combination.