How do I setup my Edimax router?
- Power on the router, and connect the router and the computer via cable or wireless. Open the web browser, type “192.168. ...
- Click “ General Setup”. Click “ Wireless ”, click “ Security Settings ”, and you are able to configure wireless security in this page. ...
- Click “ Apply “ to reboot the router, and wait about 30 seconds.
How do I log into Edimax extender?
Method 1: Open your web browser and input the access key into the address bar to log in to the extender's web configuration interface. 5. You will then be prompted to log in. The default username is “admin” and the default password is “1234”.
How do I change my Edimax wifi password?
Click “ Administrator ”, click “ Password ”, and you are able to configure the password here. Enter original password in the field “ Current Password”, and then enter new password in the field “ New Password ” and “ Confirmed Password. Please note that “ New Password “ and “ Confirm Password must be the same.
How do I reset my Edimax access point?
If you can not get the login page or if you get the login page but username admin and password 1234 failed, you can reset the router to factory default by pressing the Reset button at the back of Access Point for 15 seconds. This will erase all the setting in Access Point and restore the factory default.
What is Edimax used for?
EDIMAX - Wi-Fi Router, Extender, Access Point, IP Cam, Wi-Fi Smart Plug, IoT, Smart Home, SMB Wi-Fi.
How do I connect my Edimax wifi extender?
Press and hold the WPS button on the extender for 2 seconds, until the WPS LED ( ) starts flashing. 3. Press the WPS button on the root wireless access point within 2 minutes to establish a connection.
Are Edimax routers good?
It's a great router! I bought it as it has dual band support for 2.4 and 5 Ghz at a very affordable price. In my home setup, I've connected it to my cable Internet modem and configured it as wireless router with dynamic IP. So far, the speed has blown me away with 5 Ghz mode.
How do I connect to edimax?
Please have your wi-fi password at hand.
- 1) Plug the Edimax into a power socket with nothing attached to its Ethernet port. ...
- 2) On a phone or PC go to your wi-fi network settings. ...
- 3) Open a web browser and type "edimaxext. ...
- 4) Press the get started button shown in blue.
- 5) Select bridge mode, which is the middle option.